GENERAL OPTIONS
Protect your POWER MIG welder when not in use. Made from red canvas that is flame retardant, mildew resistant and water repellent. Fits any POWER MIG machine with or without a gas cylinder in the cylinder rack. Will not fit if spool gun holder is attached to the machine.
-
K3676-1 / Dual Cylinder Cart.
Permits side-by-side mounting of two full size gas cylinders with easy loading. Compatible with Power MIG 260 and 360MP.
STICK OPTIONS
-
K875 / Accessory Kit (for 150 amps).
-
K704 / Accessory Kit (for 400 amps).
Complete kit for stick welding. Includes 30 ft. (9.1 m) electrode cable, 25 ft. (7.6 m) work cable, headshield, work clamp and electrode holder.
TIG OPTIONS
-
K1782-2 / for 12.5 ft. (3.8 m) length, 2-cable.
-
K1782-4 / for 25 ft. (7.6 m) length, 2-cable.
PTA-17 150 Amp Air-Cooled TIG Torch.
-
K1783-2 / for 12.5 ft. (3.8 m) length, 2-cable.
-
K1783-4 / for 25 ft. (7.6 m) length, 2-cable.
PTA-26 200 Amp Air-Cooled TIG Torch.
Parts Kits
-
KP508 / for PTA-17.
-
KP509 / for PTA-26.
Magnum Parts Kits provide all the torch accessories you need to start welding. Parts kits provide collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable box.
-
K870 / Foot Amptrol™ / Provides 25 ft. (7.6 m) of remote.
Current control for TIG welding (6-pin plug connection).
Provides 25 ft. (7.6 m) of remote current control for TIG welding. (6-pin plug connection).
Needed if an Amptrol™ is not used when TIG welding. Comes with a 25 ft. (7.6 m) cable. Attaches to the TIG torch for convenient finger control.
WIRE FEEDER OPTIONS
-
K489-8 / Fast-Mate™ Adapter.
Allows guns with a Fast-Mate™ type back end to plug into a POWER MIG® welder.
-
K3570-2 / Magnum PRO 250LX™ Spool Gun.
280 amps, 60% duty cycle. Feeds 0.025-3/64 in. (0.6-1.2 mm) diameter aluminum wire on 2 lb. (0.9 kg) spools. With remote wire feed speed control. 25 ft. (7.6 m) cable.
-
3100546 / Harris® Aluminum Flow/Regulator.
355-2CD 100-580.
-
K3667-1 / Spool Gun Holder.
Provides neat storage of spool gun cable, and gas hose on POWER MIG.
-
K4797-1, -2, -3, -4 / Magnum PRO Al Fixed Conduit Push-Pull Guns.
The new, improved Magnum PRO AL Fixed Conduit Push-Pull Guns feature a new rigid liner which provides a smooth, premium aluminum welding solution. The enhanced feeding capabilities will reduce downtime and increase arc on time.
-
K4700-1-6-116A / Magnum® PRO Curve™ 300 AL Push Gun.
Ideal aluminum welding gun solution for welding 3/64”-1/16” aluminum wire of distances up to 10 ft.
-
K468 / Spindle Adapter for Small Spools.
Permits 8 in. (200 mm) O.D. spools to be mounted on 2 in. (51 mm) O.D. spindles.
-
K435 / Spindle Adapter for 14lb Coils.
Permits 14 lb. (6 kg) Innershield® coils to be mounted on 2 in (51mm) O.D. spindles.
-
K363P / Readi-Reel™ Adapter.
Adapts 22-30 lb. (10-14 kg) Lincoln Readi-Reels® of electrode to 2 in (51mm) spindle.
-
K2910-1 / 12M to 7F Connector Cable.
Power MIG 262 Spec Sheet 
