Skip to the beginning of the images gallery

K2405-2 / Vantage® 500 (Deutz®) (Not Available in US)

$37,230.82

Starting at /mo with Affirm.

AvailabilityIn stock

SKU

K2405-2

The Vantage® 500 is a diesel engine powered DC multi-process welding power source and 120 / 240 volt AC power generator. The DC welding control system uses patented Chopper Technology® for superior welding performance. (Not Available in US/Canada/EU).

Processes

Stick (SMAW).
Gouging (CAC-A).
TIG (GTAW).
MIG (GMAW).
Flux-Cored Self-Shielded (FCAW-S).
Flux-Cored Gas-Shielded (FCAW-G).

New Part Number K3239-2

Additional Information

More Information

Brand

LINCOLN ELECTRIC

Features

Multi-Process Powerhouse

This multi-process powerhouse features standard stainless steel roof and side panels, simple controls and Chopper Technology® to deliver the low maintenance, long service life, easy operation and great arc performance every owner appreciates.
With 500 amps of welding power for stick, TIG, MIG and flux-cored processes, plenty of AC Generator power (up to 20 kW/3-Ph and 12 kW/single phase), and a large 25 gallon (95 ltr) fuel tank the Vantage 500 is everything you need for the job.

Features

Corrosion-Resistant Stainless Steel Case - Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates the need to replace these items due to paint damage or rust.
Multi-Process Welding - Select one of four process modes, including CC-stick, downhill pipe (for stick), DC Touch Start TIG® or CV wire, and then dial in the desired output. Arc gouging with up to 3/8 in. (9.5 mm) carbons.
Plenty of AC Generator Power -20 kW continuous 3-phase 240V AC generator power rated at output will power industrial equipment such as a plasma cutter, pump, inverter welder or grinder. 12 kW continuous 1-phase AC generator power for common construction tools and lights.
Industrial Diesel Engine - 4 cylinder 1800 RPM Deutz® Engine with a 25 gallon (95 liter) fuel tank and fuel, oil pressure and engine temperature gauges.

Specifications

Product Weights & Dimensions

Dimensions (H x W x D)	42 in x 31.5 in x 63.1 in (1067 mm x 800 mm x 1603 mm)
Net Weight	1532 lbs (695 kg)

Machines

Machines Processes	Stick (SMAW) Gouging (CAC-A) TIG (GTAW) MIG (GMAW) Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G)
IEC Rating	500A/40V/100% @ 104°F (40°C) 550A/36V/60% @ 104°F (40°C)
Max Rating	575A/35V/50% @ 104°F (40°C)
Output Range by Mode	DC: 30-575A Pipe: 40-300A DC TIG: 20-250A CV: 14V-40V
Open Circuit Voltage	60V Peak OCV @ 1800 RPM
Rated Gouging Carbon Diameter	3/8" (9.5 mm)
Amphenol Pins (type of connector)	6 14

Engine Driven Welders

Single Phase Auxiliary Output	12,000 Watts Continuous 120/240 V
Three Phase Auxiliary Output	20,000 Watts Continuous 240 V
Auxiliary Output Frequency	60 Hz
Engine Brand & Model	Deutz® D2011L4i
Engine Description	4 Cylinder, 4 Cycle, Oil/Air-Cooled Diesel Engine with 12V Electric Start, Two-Stage Dry Type Air Cleaner, and Fuel Filter with Water Separator. MSHA Approved.
Engine Horsepower	48 HP @1800 RPM
Engine Block Size & Displacement	190 cu. in. (3.1 L)
High Idle Operating Speed @ Rated Output	1800
Low Idle Operating Speed	1425
Fuel Tank Size (US gal.)	25 US gal.
Fuel Tank Size (L)	95 L
Oil Capacity (qts.)	10.0 qts.
Oil Capacity (L)	9.5 L

Application

Typical Application

Construction
Mining
Railroad Maintenance
Construction & Field Erection
Maintenance & Repair
Offshore
Oil & Gas
Power Generation
Shipbuilding
Structural Fabrication
Structural Welding