Global provider of Welding, Safety, and Industrial supplies for the oil, gas, and construction sector.

 
Toll free: 1-888-272-5970 | |   HABLAMOS ESPAÑOL
Search
Cart
Wishlist
main product photo

0900101 / HMD900 Magnetic Drill - 2" Depth - 115V

$832.00
Starting at /mo with . Prequalify now
AvailabilityIn stock
SKU
0900101, HMD900
  • Lightweight, powerful, low cost mag drill for general fabrication.

 

hougen logo

Proposition65
More Information
Brand HOUGEN
Features
  • Large 1-1/2" x 2" capacity.
  • Hidden motor cord.
  • Ergonomic housing.
  • Increased safety with less maintenance.
  • Spring slug ejection.
  • Slot Drive arbor for more accuracy and quicker change out of accessories.
  • Many accessories are available for a portable machine shop including: drill
      chucks, countersink, and more...
  • Lift detector safety system.
  • Rear mounted controls.
  • Two year warranty.
Specifications
Electrical System 115V, 50/60 Hz - 9A, 1035W
Motor 8A (115V), 450 RPM
Diameter 7/16"- 1-1/2" (12mm - 38mm)
Depth 2" (50mm)
Cutter/Mount "12,000-Series" & Copperhead™ Carbide cutters, 3/4" shank
Dimensions 15-1/8" H x 6-3/4" W x 11-3/8" L
(384mm H x 171mm W x 289mm L)
Magnet Base 3.16" W x 6.10" L (79mm W x 167mm L)
1" Plate (25mm) Dead Lift
1952 lb. (885 kg)		 Drillpoint Breakaway
960 lb. (435 kg)
3/8" Plate (9.5mm) 1460 lb. (662 kg) 720 lb. (327 kg)
Weight 27.7 lb. (12.6 kg)
Title
HMD900 Spec Sheet
  • (1) Drill.
  • (3) Feed handles.
  • (3) Feed handle knobs.
  • (2) Set screw for cutter installation.
  • (1) Safety chain.
  • (1) 7/32" Hex wrench.

Drill Chucks

  • Easily use twist drills with an HMD900.
  • Drill chucks are quickly installed in place of the arbor.
  • Spindle adapters are required to use a drill chuck.
  • Part number 09377 includes 1/2" drill chuck and adapter.

 

Twist Drill Adapter

  • Twist Drill Adapter with Set Screw (02608).
  • Set Screw for Adapter (02695).
  • 1/2" dia. Twist Drill (03835).
  • 7/16" dia. Twist Drill (03837).
  • 3/8" dia. Twist Drill (03839).
  • 5/16" dia. Twist Drill (03841).
  • 1/4" dia. Twist Drill (03843).
  • Twist Drill Adapter Kit (03845).

 

Countersink Kit

  • 82° Countersink Kit includes countersink with inserts & (4) Pilots - 9/16, 11/16, 13/16 & 15/16" plus a torx wrench (12965).
  • 82° Countersink with Carbide Inserts (Does not include pilots) (12966).
  • 9/16" diameter Pilot (12960).
  • 11/16" diameter Pilot (12961).
  • 13/16" diameter Pilot (12962).
  • 15/16" diameter Pilot (12963).
  • Replacement Screw (05464).
  • Replacement Wrench (05465).
  • Replacement Carbide Inserts (10 Box) Use for mild steel, cast steel & malleable iron (05467).
  • Replacement Carbide Inserts Wear Resistant (10 Box) Use for structural steel, stainless steel, harder steels & non-ferrous materials (05779).

 

Pipe Adapter Kits

  • Chain mount for model HMD904, minimum 3" diameter, maximum 12" diameter (02564). 

 

Portable Vac-Pad

  • Vac-Pad works exclusively with the Model HMD900 on non-ferrous materials, diamond plate and materials with surface imperfections up to 3mm deep. Standard shop air provides 761 lbf surface holding power at 85kpa. Safety switch shuts off drill motor if air pressure drops (05000).

 

RotaMagic™ Super Concentrated Cutting Fluid

  • 1 Pint Bottle (11741).
  • (12) 1 Pint Bottles (11741-12).
  • 1 Gallon Bottle (11742).
  • (4) 1 Gallon Bottles, makes 11 gallons each (11742-4).
  • (1) 5 Gallon Pail, makes 55 gallons (11743).
  • (1) 55 Gallon Drum, makes a lot of coolant (11744).

 

RotaGel™ Cutting Lube

  • Case of 10 Tubes (11748-10).

 

RotaFoam™ Cutting Fluid

  • Case of 12 cans (11747-12).

 

Slick-Stik™ Lube

  • (12) 1.68 oz. Mini Slick-Stik™ Lubricant (11746-12).